Salient Health & Safety
What Should an Alberta Incident Report Template Include?
Photo by Annas Zakaria on Pexels

Short answer

An Alberta incident report template should capture the facts of the event, the people and witnesses involved, the immediate response, the reporting decision and the investigation with corrective actions, plus sign-off and a storage routine.

A site incident usually gets written up by whoever is closest at the time: a few lines in a notebook, a text to the superintendent, a photo on a phone. That is enough to remember roughly what happened, and not enough to answer what comes next — a WCB claim, an OHS officer asking for your investigation report, a certifying partner's auditor sampling your records. A template decides in advance what gets captured.

The basic facts, recorded the same way every time

  • Report details: a unique incident number, the name and role of the person completing the report, and the date the report was written, kept separate from the date of the incident.
  • When and where: date, time, worksite, and the specific area on it — level, grid line, room, or the equipment involved.
  • Incident type: injury, illness, near miss, property damage, or a hazard spotted before anything happened.
  • The work being done: the task at the time, equipment and materials in use, crew size, and who was supervising.
  • Conditions: weather, lighting, housekeeping, ground or surface conditions.

Near misses and hazards belong on the same form as injuries. An unmaintained piece of equipment that hurt nobody today is the cheapest warning you will get, and it disappears if there is no field for it. That only works when the form sits inside a written reporting procedure — one of the first pieces we build when we develop an OHS program for an employer.

A description of what happened, not what you think caused it

The description should be a plain chronological account: who was doing what, in what order, and what changed. Conclusions belong in the investigation section. 'Worker was rushing' is an opinion; 'worker stepped off the second rung of a ladder while carrying a sheet of plywood' is a fact. Record the person's own account in their words where you can, and keep the field free of blame and anything resembling a medical diagnosis.

Everyone involved, and every witness

  • Name, role, and contact details for the injured or involved worker.
  • The same for the supervisor, witnesses, and anyone else present.
  • A separate space for each witness to give their own account, taken as soon as possible while memory is fresh.
  • Whether a police report was filed, with the reference.

The immediate response

The form should ask who gave first aid, whether emergency services were called, whether work was stopped, and whether the scene was secured or equipment isolated.

The reporting decision, with Alberta's rules in view

This is the section most generic templates miss. Alberta OHS has three categories of reportable incident: serious injuries or incidents, mine or mine site incidents, and potentially serious incidents (PSIs). For most construction employers, the live question is whether an event is a PSI.

An incident is a reportable PSI when it had a likelihood of causing serious injury or illness, and there is reasonable cause to believe corrective action may be needed to prevent it recurring. It is not limited to workers: where a non-worker is involved, it is only a PSI if it resulted from work activities at the site or could have happened to a worker.

The employer, or the prime contractor if there is one, is responsible for reporting. PSI reports go in through Alberta's online service after the investigation is complete, as section 33(6) of the OHS Act requires.

Give the form a notification block: does this event trigger external reporting, who made that call and when, and who was told internally — the health and safety committee or representative, the prime contractor, or a WCB claim file.

The investigation and corrective actions

The form should carry the follow-up, or attach a page for it: what the investigation found, the root cause, and each corrective action with an owner and a target date, closed off when done.

Alberta requires the employer or prime contractor to investigate, prepare a report outlining the circumstances and corrective actions, keep it available for an OHS officer on demand, and give a copy to a Director and to the joint health and safety committee or representative — or make it available to workers where there is no committee or representative. A PSI report must be kept for at least two years after the incident.

Sign-off and storage

Close with the supervisor's name, signature, and date, the reviewer, the template version, and where the completed report is stored. That last field matters more than it looks: the report becomes the anchor for a WCB claim and for any later question about what you knew and when.

Salient Health & Safety builds incident reporting into working OHS programs for Alberta construction and trades employers: the form itself, the procedure that tells a crew when to fill it out, and the investigation and corrective action that follow. If your process is currently a notepad and good intentions, book a free discovery call or look at how we approach OHS program development.

Frequently asked questions

How do you write an incident report?

Fill it out as soon as you can after the event, while the people involved and any witnesses still have the details fresh. Stick to a plain chronological account of what happened, record names and contact details for everyone involved, and leave opinions about cause and blame for the investigation section. Then add the immediate response, the reporting decision, and the corrective actions that follow.

What are the 5 elements of a good incident report?

The facts of the event — who, what, when, where, and the conditions at the time — a factual description of what happened, the people and witnesses involved, the immediate response and any notification decision, and the investigation with its corrective actions. Sign-off and a clear record of where the report is stored complete it.

Can I download a free incident report format in Word?

Free templates exist online, but most are generic. Check that the one you pick has fields for the reporting decision, separate witness accounts, and corrective actions with owners and dates before you adopt it, or you will end up rebuilding it anyway.

What are the 5 steps for reporting an incident?

Make the situation safe and give first aid, then record the basic facts and a factual description before memories fade. Take witness accounts, note the immediate response, and decide whether the event triggers external reporting under Alberta's rules. Finish with the investigation, the corrective actions, and sign-off.

Free download

Alberta Incident Report Template

A 3-page form for injuries, illnesses, near misses and property damage, with the Alberta OHS reporting decision (including potentially serious incidents) and corrective actions built in.